Home About Us Used Cranes Terminology Contact Us
Home
Used Cranes
Camlok Lifting Clamps
Parallel Block Grabs
Pile Pulling Clamps
Rail Pulling Clamps
Shearlegs
TTR Vertical Flange Girder Stacking Clamps
Vertical Drum Clamp
Adjustable Dual Tine Hooks
Fixed Multi Rail Grabs
Low Headroom Drum Grabs
Pipe Hooks
TTG Horizontal Flange Girder Stacking Clamp
Twin Arm Coil Hooks
Horizontal Lifting Drum Tongs
Interchangeable Multi Rail Grabs
Light Weight Block Grabs
Pile Pitching Clamps
Universal Turning Hooks
Cable Drum Lug
Inside Coil Grabs
Upright Drum Clamps
Light Weight Profile Steel Grabs
SCS Swivel Jaw Beam Clamps
Adjustable Single Tine Hooks
Camlok Rail Clamps & Grabs
Camlok RH/WH/WHL/WHP Horizontal Plate Clamps
Camlok Vertical Plate Clamps
Camlok Round Stock & Block Grabs
Camlok SCA Angle Clamp Beam Clamps
Camlok Screw And Beam Clamps
Camlok Standard Beam Clamps
Camlok TAG/TWG Wide Jaw Universal Clamps
Camlok THK Thin Sheet Horizontal Plate Clamps
Camlok Bag Lifters & Fork Tine Hooks
Camlok THS Loading Horizontal Plate Clamps
Camlok Crane Forks
Camlok 92 Series Vertical Plate Clamps
Camlok ACH Adjustable Horizontal Plate Clamps
Camlok Beam Clamps With Shackle
Camlok CH/HH Horizontal Plate Clamps
Camlok Coil Handling Clamps
Camlok CX Hinged Vertical Plate Clamps (Heavy Duty- Side Loading)
Camlok CY Hinged Vertical Plate Clamp (Two Leg Chain Sling)
Camlok Girder Clamps
Camlok Heavy duty plate clamps with safety lock
Camlok HG 'High Grip' Vertical Plate Clamps
Camlok Horizontal Plate Clamps
Camlok Magnetic Lifting
Camlok Manual Lifting
Camlok Non-marking Clamps
Container Lifting Lugs
Camlok TJC 'Twin Jaw' Vertical Plate Clamps
Board Lifting Clamps
Hand Grip Clamps
Magnetic Claws
Single Arm C-Hooks
CG Standard Girder Turning Clamps
Crane Forks & Safety Cage
Permanent Lifting Magnets
Camlok TSB Non-marking Friction Plate Clamps
Camlok Safety Cages & Shearlegs
Manual Balance Crane Forks
Self Weight Balance Crane Forks
Standard Drum Clamp
LJ Non-Marking Plate Clamps
Round Stock Grabs
TTT Horizontal Girder Clamps (Split Toe Plate)
Big Bag Lifters
Camlok Drum Handling Clamps
Single Rail Clamps
Tipping Drum Grab

 MANUAL BALANCE CRANE FORKS



Camlok Crane forks - MANUAL

with adjustable tines, adjustable height and manual balancing system

These TKG-VH crane forks are equipped with adjustable tines and adjustable height. The balancing system engages when the shackle is manually hooked into the appropriate notch.

 

All crane forks comply to all current European Quality Standards.

Factor of safety 4 : 1

Maintenence free.

Highly visable safety colour.

For the transport of rings or coils, the fork tines are simply pushed together.

Easily adjustable tines for all pallet sizes.

Supplied with chain for securing the load.



Join our free email newsletter to receive notification when new stock has been added to our 'Used Cranes' section

Your First Name :
Your Email Address :
Write code below
Servicing West Midlands | Servicing Birmingham

Copyright © 2019 www.cranehandling.com. All Rights Reserved